Parker AC30 - Page 436

D-176 Parameter Reference
AC30 series Variable Speed Drive
Parameter Name
No.
Path
Default
Range
Units
Writable
Output A
1756
Setup::Inputs and Outputs::System
Board Option
Parameters::System Board::System
Board IO
FALSE
ALWAYS
Value presented on terminal TB2.1 when "1679 Output Source" is set to DIGITAL OUTPUTS
Output B
1757
Same as PNO 1756
FALSE
ALWAYS
Value presented on terminal TB2.3 when "1679 Output Source" is set to DIGITAL OUTPUTS
Output Z
1758
Same as PNO 1756
FALSE
ALWAYS
Value presented on terminal TB2.5 when "1679 Output Source" is set to DIGITAL OUTPUTS
SB Digital Input 1
1759
Monitor::Inputs and Outputs
Parameters::System Board::System
Board IO
NEVER
Digital input from TB4.1, TRUE for a high voltage and FALSE for a low voltage.
SB Digital Input 2
1722
Monitor::Inputs and Outputs
Parameters::System Board::System
Board IO
NEVER
Digital input from TB4.2, TRUE for a high voltage and FALSE for a low voltage.
SB Digital Input 3
1723
Same as PNO 1722
NEVER
Digital input from TB4.3, TRUE for a high voltage and FALSE for a low voltage.
Functional Description
These parameters are used to configure the system board outputs and to monitor the system board inputs.