Parker AC30 - Page 159

Trips & Fault Finding 10-9
AC30 series Variable Speed Inverter
CODE
ERROR
Possible Reason for Error
1302
HTTP server fault
 Record the error message and contact Technical Support
1303
DCT server fault
 Record the error message and contact Technical Support
1303
DCT server fault
 Record the error message and contact Technical Support
1311
Ethernet PHY
 Record the error message and contact Technical Support
1312
Precision Time
Protocol
 Record the error message and contact Technical Support
1401
1402
Control Module test
 Control module self-test error
1403
1404
Power stack test
 VCM not secured to power stack
 Power stack self-test error
1501
1502
1503
IO Option identity
IO Option processor
Unknown IO Option
 Ensure the IO option is correctly fitted
 Update the firmware in the inverter.
 Replace the IO option
1504
IO Option watchdog
 The IO Option has become disconnected
 Option reset problem. Upgrade drive firmware to 1.11 or greater to improve the option reset control.
1601
Stack internal fault
 Return the power stack to Parker Hannifin repair center.
1602
Incompatible stack
 Return the power stack to Parker Hannifin repair center.
1801
Heatsink thermsistor
unplugged
 Return the power stack to Parker Hannifin repair center.
1901
System Board Data
 The identifying data on the system board is corrupt
1902
System Board Type
 The system board type is not recognized by this version of drive firmware. Update the firmware to the latest
version.