Pfaff 3588-04/020 - Adjusting the Sewing Head; Spacing between Sewing Head and Bedplate

Adjustment
13 - 3
13.05 Adjusting the sewing head
13.05.01 Spacing between sewing head and bedplate
Requirement
When the sewing head is lowered, the distance from the lower edge of the shaft 1 to the
bedplate must be 132.8 mm.
● Check the distance between the shaft 1 and the bedplate using adjustment gauge 2.
● If required, turn plunger 3 (nut 4) according to the requirement.
Fig. 13 - 02
4
3
2
1
132.8 mm
1