12 - 2
Care and maintenance
12.01 Cleaning the machine
The required cleaning cycle for the sewing machine is dependent on the following factors:
● Single or multi-shift operation
● Accumulation of dust from the various fabrics
Thus, appropriate cleaning instructions can only be determined on an individual basis for
each machine.
To avoid operation disturbances, we recommend the following cleaning work for a machine
in single shift operation:
● Clean the hook compartment and the needle area of the sewing head several times daily.
● Clean the entire machine at least once a week.
To do this:
● Select SEWING mode.
● Select MANUAL SEWING function (number key 0).
● Select the change bobbin function (number key 8).
(Sewing head tilts up / hook compartment cover opens).
● After cleaning is finished, press the double-start keys 1 simulataneously.
(Sewing head tilts down / hook compartment cover closes).
Fig. 12 - 01
1
1
To Next Page
Loading...
