11 - 31
Input mode functions
11.06.07 Example for programming a seam
In the following, the programming of a seam is explained by means of an example. As a
pattern for programming we will use a drawing with the corresponding coordinates
(see Fig. 11-44).
In order to use the seam program, the sewing jig and the corresponding part
set must match.
Fig. 11 - 44
Fig. 11 - 45
● Lift the sewing jig (number key 1) and insert the pattern.
● Lower the sewing jig (number key 1).
● Press Enter.
2
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
● Select INPUT mode
(prior to the selection, the machine must be in basic position).
● Select the Input menu function (number key 0).
● Select the CREATE / MODIFY PROGRAM function.
● If required, enter the respective code number via the number keys.
Enter
122 mm
6.4 mm
3.2 mm
134 mm
127 mm
61 mm
jig zero point
x+
x-
y+
y-
INSERT PATTERN
CONTINUE WITH ENTER
To Next Page
Loading...
