Pfaff 3588-04/020 - Monitoring the Sewing Jig Feed

Adjustment
13 - 38
13.06.06 Monitoring the sewing jig feed
Requirement
1. In the y-direction, the sewing jig 5 must not be able to move from its zero point more
than 5 mm toward the bottom and 260 mm to the top.
2. The proximity switch 3 must be 0.2 mm below the switch vane 1.
Fig. 13 - 34
● Move the switch vane 1 (screws 2) according to requirement 1.
● Move the proximity switch 3 (screw 4) according to requirement 2.
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
260 mm
5 mm
0
5
1
2
3
4
0.2 mm