8 - 3
Mounting and commissioning the machine
8.04 Commissioning
● Clean the whole machine thoroughly and check the electrical leads and pneumatic
connecting tubes for any damage.
● Make sure that the mains voltage corresponds to the connection voltage of the machine
(see chapter 3 Specifications). If the mains voltage and the connection voltage differ,
the machine must not be operated under any circumstances.
● Have specialists connect the machine to the mains.
● Oil the machine and/or fill with oil (see
chapter 12 Care and maintenance).
● Connect machine to the compressed air system. The manometer on the air filter/
lubricator unit must display a pressure of 6 bar. If necessary, set to the correct value
(see chapter 12.05 Checking / regulating air compression).
Fig. 8 - 04
1
To Next Page
Loading...
