10 - 1
Sewing
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 10 - 02
Before the machine can be further operated, the error must be corrected.
Errors may only be corrected by authorized specialist personnel (see chapter
14.02 Error description).
ERROR: SEWING DRIVE (NO. 52H)
Fig. 10 - 01
Explanation of the symbols:
Program station
Next to the symbol for the selected program station (A or B) you will find the assigned pro-
gram number.
Parts program number
Next to this symbol the number of the current parts program is displayed.
Stitch length
Next to this symbol you will find the stitch length value for the selected seam program.
Maximum speed
Next to this symbol the maximum speed of the machine is indicated.
Piece-counter
Next to this symbol the current piece count is displayed.
10.02 Error messages
If an error occurs at the machine, an error message is displayed.
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
10 Sewing
In the SEWING mode you will find functions in automatic
and manual SEWING which are
used for production and its preparation. The mode can be selected via the corresponding
keys on the control panel.
10.01 Status bar
In the upper section of the display the current machine status is displayed by means of
symbols and corresponding values.
To Next Page
Loading...
