15 - 4
Y1.1 Pocket plate at front
Y1.2 Pocket plate at back
Y2.1 Pocket plate on
Y2.2 Pocket plate off
Y3 Pocket plate airing on
Y5.1 Folder up
Y5.2 Folder down
Y6 Corner folder at front
Y7 Edge folder 1 at front
Y8 Edge folder 2 at front
Y9 Edge folder 3 at front
Y10 Suction on
Y11 No pressure on label retaining clamp, or it is open
Y12.1 Flap positioning on / var. sewing slot narrow
Y12.2 Flap positioning off / var. sewing slot wide
Y30 Presser foot up / Thread trapper up
Y31.1 Raise head (arm)
Y31.2 Lower head (arm)
K32 Thread tension release on (Thread tens. up)
K33 Thread cutting on (vertical hook system)
Y33 Thread cutting on (horizontal hook system)
Y34 Air blast / needle cooling on
Y36 Zigzag on (programmable output 3)
Y37 Additional thread tension (prog. output 4)
Y39 Bobbin cover open
Y39.1 Bedplate off
Y39.2 Bedplate on (tilt)
Y40 Oiling on
Y50 Roller off
Y51 Clamp strap on
Y52 Stacker stand at front
K53 Frame height adjustment on
A60.3 LUST-converter „STR“
A60.4 LUST-converter „STL“
A60.5 LUST-converter „S1 ind“
A60.6 LUST-converter „S2 ind“
A60.7 LUST-converter „GND“
Outputs
To Next Page
Loading...
