14 - 16
Controller
Ref. no. Function
0 Program station A
1 Program station B
2 Program number selection / Station keys programming
3 Automatic change of program station
4 Frame up / down
5 Bobbin thread functions
6 RESET STITCH-COUNTER
7 BOBBIN-THREAD PRESELECT
8 Head functions
9 STITCH LENGTH
10 MAXIMUM SPEED
11 REDUCED SPEED
12 DELAY ZIGZAG ON
13 DELAY ZIGZAG OFF
14 SEWING
15 Folder functions
16 INTERMEDIATE STOP
17 UNI-MATERIAL
18 BASIC POSITION POCKET PLATE
19 ALTERNATING FOLDING
20 ALTERNATING LABELLING
113 EDGE FOLDER CONFIGURATION
21 CHANGE PART SET
22 Parts program functions
23 ROLLING DIRECTION STACKER
24 SLOW ROLLING TIME STACKER
25 FAST ROLLING TIME STACKER
109 TIME FOR STACK TRESTLE BACK
26 TIME FOR EDGE FOLDERS BACK
27 TIME FOR POCKET PLATE UP
28 FEED SPEED
29 SEAM CORRECTION X
30 SEAM CORRECTION Y
14.03 Tables
14.03.01 Tables for lock/release functions
To Next Page
Loading...
