14 - 21
Controller
14.03.03 Tables of outputs
Node A11/X300
Output Denomination Index
number
OUT1 Y1.1 pocket plate forwards 0
OUT2 Y1.2 pocket plate backwards 1
OUT3 Y2.1 pocket plate up 2
OUT4 Y2.2 pocket plate down 3
OUT5 Y3 lift pocket plate on 4
OUT6 K4 Pocket-die solenoid on 5
OUT7 not assignet 6
OUT8 Y5.1 folder up 7
OUT9 Y5.2 folder down 8
OUT10 Y6 corner folder forwards 9
OUT11 Y7 folder plate 1 forwards 10
OUT12 Y8 folder plate 2 forwards 11
OUT13 Y9 folder plate 3 forwards 12
OUT14 Y10 air suction on 13
OUT15 Y35.1 jig up 14
OUT16 Y35.2 jig down 15
Node A12/X300
Output Denomination Index
number
OUT1 Y30 presser foot down/ thread trapper up 16
OUT2 Y31.1 lift head 17
OUT3 Y31.2 lower head 18
OUT4 K32 thread tension is released 19
OUT5 Y34 air blast needle cooling system on 20
OUT6 Y36 zig-zag on (prog. output 3) 21
OUT7 Y37 secondary tension on (prog. output 5) 22
OUT8 not assignet 23
OUT9 Y50 roller down 24
OUT10 Y51 retaining clamp up 25
OUT11 Y52 stacker frame back 26
OUT12 Y33 thread trimming on 27
OUT13 progr. output 1 28
OUT14 progr. output 2 29
OUT15 Y39 On subclass -04/020: bobbin cover open 30
OUT15 Y39.2 On subclass -02/020: bedplate up 30
OUT16 Y39.1 On subclass -02/020: bedplate down 31
To Next Page
Loading...
