Adjustment
13 - 50
13.07.02 Slanting the lateral folder plates
Do not begin with this work process until the adjustments in chapters
13.06.12 Aligning the seam in relation to the pocket
and
13.06.13 Seam
backtack distance have been carried out!
● With the folder plates fully extended, transfer the front edges of the stops 1 and the
outer edge of the pocket plate 2 to the lateral folder plate.
● Trace slanted edge of 30°.
● Work the folder plate up to 1 - 2 mm before the trace.
● Round off the edges of the folder plate and polish.
2
Fig. 13 - 45
1 - 2 mm
1 - 2 mm
30°
30°
1
1
To Next Page
Loading...
