Pfaff 3588-04/020 - Program Interruption

10 - 3
Sewing
Machine in operation
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 10 - 04
Symbols in the display:
Stop (number key 1)
Direct function for stopping the entire program cycle (see chapter 10.04 Program
interruption).
Folding on/off (number key 5)
Basic position (number key 6)
With this direct function you can move the folder to its basic position without interrupting
the program cycle. For example, this is useful if you want to align a workpiece which has
been inserted incorrectly.
Program station A (number key 7)
Program station B (number key 8)
Label feed on/off (number key 9)
10.04 Program interruption
To interrupt the program cycle of a seam program
● press the stop switch (see chapter 7.02 Stop switch) or
● activate the Stop function on the control panel.
When a program is interrupted, the following display appears:
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 10 - 05
When the machine is stopped in this way, the folder and stacker devices as
well as the sewing station and the sewing jig transport do not position in the
basic position!
● To continue the program cycle activate the Start function (number 1) or
● press the double-start key (see chapter 7.04 Double-start key).
BOBBIN : 481 / 10000
BOBBIN : 481 / 10000