Input mode functions
11 - 6
11.05 Functions in the INPUT mode
Initial state in the INPUT mode
Fig. 11 - 07
Explanation of the symbols in the display:
Program station A (number key 1)
When this function is active, a seam program previously assigned to this program station is
called up for sewing.
Program station B
(number key 2)
When this function is active, a seam program previously assigned to this program station is
called up for sewing.
Program number selection
(number key 3)
With this function the desired seam program can be assigned to the currently active pro-
gram station.
If necessary, the parts program
can also be selected with this function.
Automatic program change
(number key 4)
When this function is active, an automatic change between the program station A and B is
carried out after the seam program has been sewn.
Vertical adjustment of frame
(number key 5)
If the machine is equipped with a vertically adjustable frame (optional feature), the height of
the frame can be adjusted after this function has been selected.
Bobbin thread functions
(number key 6)
This function opens a menu for selecting various bobbin thread functions:
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 11 - 08
1 - RESET STITCH-COUNTER
2 - BOBBIN THREAD PRE-SELECT: 10000 STITCHES
RESET STITCH-COUNTER
Resets the stitch-counter to "0", e.g. after an unplanned bobbin change.
BOBBIN-THREAD PRESELECT
Used to enter the number of stitches after which the machine automatically stops for a
bobbin change.
1
2
To Next Page
Loading...
