Preparation
9 - 8
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
9.08 Edge folder configuration
With this function enabled, the program stations (A and B) may have different edge-folder
configurations assigned to them.
● Press the key to call up the INPUT mode.
Depending on the machine position and configuration, the illustration of the
status line may differ from the following example:
Fig. 9 - 09
● Call up the
edge folder functionsedge folder functions
edge folder functionsedge folder functions
edge folder functions (number key 8).
● Scroll through the menu page using the
right arrow keyright arrow key
right arrow keyright arrow key
right arrow key.
● Call up the EDGE FOLDER CONFIGURATION function.
● Switch the function on or off using
number keys 1 or 0number keys 1 or 0
number keys 1 or 0number keys 1 or 0
number keys 1 or 0.
Using the EDGE FOLDER CONFIGURATION function (number key 2) is is
possible to change the edge-folder configuration as required.
Example:
6
0
1
or
A
Y6 - 1
Y7 - 0
Y8 - 1
Y9 - 1
B
Y6 - 0
Y7 - 1
Y8 - 1
Y9 - 1
Y6
Y9
Y8
Y7
Y6
Y6
Y6
Y9 Y9 Y9
Y8
Y7
Y7
To Next Page
Loading...
