Pfaff 3588-04/020 - Aligning the Seam in Relation to the Pocket

Adjustment
13 - 45
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
● Switch on the machine.
● Select the INPUT mode.
● Select parts program functions function (number key 9).
● Align the seam according to the requirement via the functions SEAM CORRECTION X
(number key 7) and SEAM CORRECTION Y (number key 8).
● Store the changes with the Enter key.
● Switch off the machine.
13.06.12 Aligning the seam in relation to the pocket
Requirement
The seam is to be at the same distance on all sides to the pocket edge.
Enter
Fig. 13 - 40