10 - 2
Sewing
10.03 Automatic SEWING
Automatic SEWING is used primarily in this type of production.
● Press the double-start keys (see chapter 7.04 Double-start keys) or
● activate the inserting fuction switch (see chapter 7.03 )
to start the program cycle after you have inserted the workpiece.
Depending on the stage of the cycle and the machine configuration, different symbols
(functions) are displayed.
Basic position of the machine
When the machine has just been switched on, it is in the automatic SEWING
mode. The sewing jig transport, folder and sewing station as well as the
stacker station are in the basic position. The function Manual SEWING
is
switched off.
Explanation of the symbols in the display:
Presser foot up/down
(number key 2)
Direct function for lifting and lowering the presser foot as well as for opening and closing
the thread trapper.
Retainer clamp up/down
(number key 3)
Direct function for opening and closing the retainer clamp at the stacker station (for
removing the workpiece).
Folding on/off
(number key 5)
(only when ALTERNATING FOLDING is selected)
Direct function for manipulating the automatic alternating folding. If the symbol is displayed
on a dark background, folding will be carried out in the next program cycle.
Program station A
(number key 7)/Program station B
(number key 8)
(The function Automatic program change must be switched on.)
Direct function for manipulating the automatic program change. The program of the station
whose symbol is displayed on a dark background will be executed next.
Label feed on/off (number key 9)
(only available if label feed mechanism is installed)
Direct function for switching the label feed on or off respectively. If the symbol is displayed
on a dark background, a label will be fed during the next program cycle.
Switch on manual sewing
(number key 0)
With this function you can switch between automatic
and manual SEWING. If this
function is switched off, the automatic SEWING mode is active.
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 10 - 03
BOBBIN : 481 / 10000
To Next Page
Loading...
