Input mode functions
11 - 12
READ ONE PROGRAM FROM DISK
One program to be selected is read into the machine memory from a disk.
READ ALL PROGRAMS FROM DISK
All programs on the disk are read into the machine memory.
WRITE ONE PROGRAM ON DISK
One program to be selected from the machine memory is written on disk.
WRITE ALL PROGRAMS ON DISK
All programs in the machine memory are written on disk.
DELETE PROGRAM
Opens a menu where you can delete seam programs:
1
2
3
4
3
Fig. 11 - 20
1 - DELETE ONE PROGRAM IN MEMORY
2 - DELETE ALL PROGRAMS IN MEMORY
3 - DELETE ONE PROGRAM ON DISK
4 - DELETE ALL PROGRAMS ON DISK
DELETE ONE PROGRAM IN MEMORY
Deletes a selected program from the machine memory.
DELETE ALL PROGRAMS IN MEMORY
Deletes all programs in the machine memory.
DELETE ONE PROGRAM ON DISK
Deletes a selected program from the disk.
DELETE ALL PROGRAMS ON DISK
Deletes all programs on a disk.
FORMAT DISK
Formats a disk and names it "K3588".
When you format a disk, all data on the disk are erased!
STATISTICAL PROGRAM DATA
Displays the following program data:
● program number ● stitch count
● jig code ● stitch length
● obstacles ● number of bytes
DATA TRANSFER WITH PC
Enables the machine to communicate directly with a personal computer using the
software SYS3000 (for more detailed information please refer to the SYS3000
manual).
4
1
2
3
4
6
5
To Next Page
Loading...
