Pfaff 3588-04/020 - Aligning the Pocket Plate Guide

Adjustment
13 - 35
13.06.04 Aligning the pocket plate guide
Requirement
Guide 7 must be positioned perpendicular to guide 8 of the sewing jig feed.
● Select the Sewing mode.
● Machine moves to basic position.
● Remove pocket plate and insert pocket plate gauge 1.
● Select INPUT mode.
● Select the FOLDER POSITION function from the service menu (see chapter 11.03
Summary of the service functions).
● Check the requirement using adjustment pin 2.
● Turn off compressed air.
1
7
90°
8
1
2
Fig. 13 - 32