9 - 1
Preparation
9 Preparation
All regulations and instructions in this Instruction Manual are to be observed!
Special attention is to be paid to the safety regulations!
All preparation work is only to be carried out by appropriately trained personnel!
9.01 Inserting the needle
Turn the machine off!
Danger of injury if the machine
starts up suddenly!
Only use 134 or 1955 system needles!
● Raise the needle bar to its highest
postion by turning the handwheel.
● Loosen screw 1 and insert needle 2 in
the needle bar as far as it will go.
● Align needle 2 in such a way that the
long needle groove is pointing to the
folder station and tighten screw 1.
Fig. 9 - 01
1
2
To Next Page
Loading...
