Controls
7 - 4
7.04 Double-start keys
● In MANUAL operation mode, when both double-start keys 1 are activated
simultaneously the folder is moved forward and lowered.
● In AUTOMATIC operation mode, when both double-start keys 1 are activated
simultaneously the entire program sequence is started.
● The double-start keys 1 also are used to continue the program after the bobbin has been
replaced or the program has been interrupted.
7.05 Handwheel
● By turning and simultaneously pushing
the handwheel 1 in, the needle bar can
be positioned manually as required.
Fig. 7 - 04
Fig. 7 - 05
1
1
1
To Next Page
Loading...
