Input mode functions
11 - 30
Deactivate Insert
(number key 0)
Allows you to switch between the Insert
and Initial state
mode.
When the function is active (i.e. displayed on a dark background), the Insert
mode is active.
The CREATE / MODIFY PROGRAM function can be ended at any time by
pressing the operation mode keys (INPUT/SEWING). In general, the function
should be concluded with stitch generation since only complete programs, i.e.
programs with a stitch data record, can be sewn. It is, however, possible to end
the program without stitch generation so that faulty or uncompleted programs
can be saved.
To Next Page
Loading...
