11 - 29
Input mode functions
ZIG-ZAG
Allows you to enter a section for which the zig-zag device at the sewing head is
additionally switched on. Without having to change into the programming mode, the
zig-zig can be delayed at the machine (see chapter 11.05).
SECONDARY TENSION
Allows you to enter a section for which the secondary tension is switched on.
REDUCED SPEED
Allows you to enter a section for which the machine sews with reduced speed. The
value for the reduced speed is selected at the machine (see chapter 11.05).
SPEED
A fixed speed is entered in the program.
VARIABLE SEWING SLOT
The sewing slot can be set wide or narrow.
PROGRAMMABLE OUTPUTS
Allows you to switch selectable outputs via a menu.
OUTPUT 1
OUTPUT 2
SEAM INTERRUPTIONS
Interrupts the sewing of the program. When you select this function, a menu is
displayed which lets you choose the type of interruption.
PROGRAMMABLE STOP
A stop is programmed in the program.
Press the Start function to continue the sewing operation.
WAIT FOR INPUT 1
The sewing of the program is interrupted until the input has reached the
corresponding value.
WAIT FOR INPUT 2
The sewing of the program is interrupted until the input has reached the
corresponding value.
WAIT FOR TIME
The sewing of the program is stopped until the program time has elapsed.
1
2
3
4
5
1
2
7
1
2
3
4
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 11 - 43a
<- - - - >
6 - PROGRAMMABLE OUTPUTS .....
7 - SEAM INTERRUPTIONS .....
6
To Next Page
Loading...
