14 - 25
Controller
Input Denomination
IN1 JIGCODE Bit 0
IN2 . Bit 1
IN3 . Bit 2
IN4 . Bit 3
IN5 . Bit 4
IN6 . Bit 5
IN7 . Bit 6
IN8 . Bit 7
IN9 BOBERR bobbin thread disturbance
IN10 ETERR label feed error
IN11 ETRDY label feed completed
IN12 ETINKL label in clamp
IN13 not assigned
IN14 E12.1 Flap position switched on (flap version 2)
IN14 E12.2 flap positioning off / sewing slot wide (flap version 1)
IN15 E54.1 frame up
IN16 E54.2 frame down
Node A13/X400
To Next Page
Loading...
