Pfaff 3588-04/020 - Page 86

Input mode functions
11 - 36
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
● Select the Line function (number key 2).
● Move to the line end point (number keys 1 - 4).
● Press Enter.
● Press Esc.
Fig. 11 - 64
X: -610 Y: 0 11: LINE
● Select Machine functions (number key 9).
● Switch off the ZIG-ZAG function (number key 1).
● Press Enter.
Fig. 11 - 65
X: -610 Y: 0 12: ZIGZAG OFF
S-PAR: 0
● Select Graphical functions (number key 6).
● Switch on the STANDARD STITCH LENGTH function.
(You will jump to the new menu - the value stays unchanged.)
Fig. 11 - 66
X: -610 Y: 0 13: ST. STITCH LENGTH
3.4 MM
● Select the Line function.
● Move to the end point of the line (number keys 1 - 4).
● Press Enter.
(You remain in the menu for entering straight lines.)
Enter
Esc
1
Enter
1
Enter