11 - 39
Input mode functions
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 11 - 74
X: 546 Y: 0 21: ZIGZAG OFF
S-PAR: 0
● Switch on
Thread trimmingThread trimming
Thread trimmingThread trimming
Thread trimming.
Fig. 11 - 75
X: 546 Y: 0 22: THREAD TRIMMING
● Select INPUT mode to end the seam programming.
(The seam program is loaded in the machine memory.)
You must perform the stitch generation in order to be able to sew with the
created or modified seam program. Incomplete or faulty programs may be
ended without stitch generation. However, when selecting the seam program
in the SEWING
mode, the respective error message will be displayed.
● Perform the stitch generation.
Always execute a newly created or modified seam program step by step to
make sure that it matches the sewing jig!
● After the respective program number has been entered, the created seam program can
be sewn in the SEWING
mode.
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 11 - 76
GENERATE STITCHES ?
0- NO
1- YES
1
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
To Next Page
Loading...
