User’s Manual of IGS-4215-16T2S
• Flow Control
When Auto Speed is selected for a port, this section indicates the flow control
capability that is advertised to the link partner. When a fixed-speed setting is
selected, that is what is used. The current Rx column indicates whether pause
frames on the port are obeyed. The current Tx column indicates whether pause
frames on the port are transmitted. The Rx and Tx settings are determined by the
result of the last Auto-Negotiation. Check the configured column to use flow
control. This setting is related to the setting for Configured Link Speed.
Buttons
: Click to apply changes.
Figure 4-4-7: LAG Port Status Page Screenshot
The page includes the following fields:
Object Description
• LAG
The LAG for the settings contained in the same row.
• Description
Displays the current description.
• Port Type
Displays the current port type.
• Enable State
Displays the current enable state.
• Speed
Displays the current speed.
• Duplex
Displays the current duplex mode.
• Flow Control Config
Displays the current flow control configuration.
• Flow Control Status
Displays the current flow control status.
To Next Page
Loading...
Need help?
General