Planet IGS-4215 Series User Manual

User’s Manual of IGS-4215-16T2S
16
1.4 Product Features
Physical Port
 16-port 10/100/1000BASE-T RJ45 with auto MDI/MDI-X function
 2 SFP interfaces, supporting 100/1000BASE-X SFP transceiver type auto detection
 1 RJ45 console interface for basic management and setup
Industrial Case and Installation
 Dual power input, redundant power with reverse polarity protection
- DC 12 to 48V input or AC 24V input
- Active-active redundant power failure protection
- Backup of catastrophic power failure on one supply
- Fault tolerance and resilience
 IP30 metal case
 DIN-rail and wall-mount designs
 Supports ESD 6KV DC Ethernet protection
 Supports -40 to 75 degrees C operating temperature
 Free fall, shock-proof and vibration-proof for industries
Switching
 Features Store-and-Forward mode with wire-speed filtering and forwarding rates
 IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
 8K MAC address table size
 10K jumbo frame
 Automatic address learning and address aging
 Supports CSMA/CD protocol
Layer 2 Features
 Supports VLAN
− IEEE 802.1Q tagged VLAN
− Up to 256 VLAN groups, out of 4096 VLAN IDs
− Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
− Private VLAN (Protected port)
− Protocol-based VLAN
− Voice VLAN
− GVRP
 Supports Spanning Tree Protocol
− IEEE 802.1D Spanning Tree Protocol (STP)
− IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
− IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
− BPDU Guard
 Supports Link Aggregation
− IEEE 802.3ad Link Aggregation Control Protocol (LACP)
− Cisco ether-channel (static trunk)

Planet IGS-4215 Series Specifications

General

Brand	Planet
Model	IGS-4215 Series
Category	Switch
Language	English