User’s Manual of IGS-4215-16T2S
The page includes the following fields:
Object Description
• Port
The switch port number of the logical port.
• Egress Rate Limit (Kbps)
Displays the current egress rate limit.
4.12.4.3 Egress Queue
The Egress Queue Bandwidth Control Settings and Status screens in Figure 4-12-21 and Figure 4-12-22 appear.
Figure 4-12-21: Egress Queue Bandwidth Settings Page Screenshot
The page includes the following fields:
Object Description
• Port
Select port number from this drop-down list.
• Queue
Select queue number from this drop-down list.
• State
Enable or disable the port rate policer. The default value is "Disabled".
• CIR (Kbps)
Configure the CIR for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000.
Buttons
: Click to apply changes.
Figure 4-12-22: Egress Queue Status Page Screenshot
To Next Page
Loading...
Need help?
General