3. Press OK to close the window.
19.2 Unit type
Unit type
tells you which type of dental unit you are working on.
19.3 Unit serial number
Unit serial number
shows the serial number of your dental unit. If the dental
unit’s main control PCB is not equipped with a software licence dongle, no
serial number is displayed.
19.4 Unit software version
Unit SW version
shows the software version.
Press > to display detailed information on the different parts of the software.
19.5 Service
Service
contains information for service situations.
Press > to display the following items:
•
Service contact details
•
Yearly maintenance
•
Storage information
•
GUI diagnostics
•
PlanID
•
Clock calibration
•
Product registration
•
Peripherals
•
Dental unit model
•
Screensaver
19.5.1 Service contact details
The service contact details give you information on whom to contact when
you need technical assistance. The contact information can only be edited
by a qualified Planmeca service technician.
19.5.2 Yearly maintenance
Yearly maintenance tells you
• when the yearly maintenance was last performed
• how many days are left until the next yearly maintenance.
The last item,
Confirm yearly maintenance
, is for qualified Planmeca service
technicians only.
19.5.3 Storage information
Storage information
contains details on the control panel SD card.
19 Checking dental unit details
User's manual Planmeca Compact i 97
To Next Page
Loading...
Need help?
General
