Planmeca Compact i Touch v2 - 25.11 Wireless foot control

25.11 Wireless foot control
25.11.1 Pairing wireless foot control
About this task
If no wireless foot control is connected to your dental unit, or if you want to
change the current wireless foot control to another, you must pair the dental
unit and the foot control.
Steps
1. Press Program.
2. Press Foot control.
The Wireless foot control window opens.
3. Open the Configuration tab.
4. The Foot control serial no field displays the current foot control’s serial
number. If you want to change the foot control, press Edit.
NOTE
On the foot control, the serial number can be found on its underside.
The Bind foot control window opens.
25 Programming
196 Planmeca Compact i User's manual