Press > to display the relevant information.
19.5.4 GUI diagnostics
GUI Diagnostics
shows the current hardware revision of the control panel
and also contains tools for finding possible errors in the touch display.
CAUTION
GUI diagnostics is only meant to be used by a qualified Planmeca service
technician.
19.5.5 PlanID
In the
Details
tab you can view details on the tag ID and the PlanID reader's
region of operation. To change the region, contact your Planmeca dealer.
CAUTION
The
Configuration
tab contains tools for enabling/disabling the PlanID reader
as well as for adjusting its power level, and is only meant to be used by a
qualified Planmeca service technician.
19.5.6 Clock calibration
For instructions on how to calibrate the clock, see section "Calibrating clock"
on page 200.
19.5.7 Product registration
For instructions on how to register your dental unit, see section "Registering
your product" on page 5.
19.5.8 Peripherals
Peripherals
contains information on and service tools for:
• Solanna operating light
• Capacitive patient sensor (Capsense)
CAUTION
Peripherals is only meant to be used by a qualified Planmeca service
technician.
19.5.9 Dental unit model
Dental unit model
shows the model of your dental unit.
19.5.10 Screensaver
It is possible to configure the dental unit so that a screensaver is displayed
when the
Sign in
window has been unused for 3 minutes. To take a standard
or custom screensaver into use, contact your Planmeca dealer.
19.6 Network settings
The front page of
About this unit
shows the dental unit’s IP address next to
Network settings
. Press > to display the dental unit's network settings.
Press the
Romexis
tab to view network settings related to the Planmeca
Romexis connection.
19 Checking dental unit details
98 Planmeca Compact i User's manual
To Next Page
Loading...
Need help?
General
