NOTE
If the chair is equipped with a chair-mounted left/right suction arm, make
sure that the Flexy-holder is not above the cuspidor when driving the chair
down. If the chair does not move downward and H 03 is displayed, check
that the chair-mounted arm is not in the upmost position. This arm position
prevents the chair from moving downward.
11.2 Flexy-holder
The suction handpieces are placed in the Flexy-holder.
The Flexy-holder is a suction holder that is attached to the suction arm. Its
integrated control panels enable you to control selected functions of the
dental unit. For more information on the control panel, see section "Control
panel on Flexy-holder" on page 74.
11 Suction system
58 Planmeca Compact i User's manual
To Next Page
Loading...
Need help?
General
