16 Signing in and out
16.1 Signing in
NOTE
The sign in method depends on the dental unit’s configuration. For more
information on the configuration, or for changing it, contact your Planmeca
dealer.
NOTE
Before you can sign in with a PlanID card, you must assign a PlanID card to
your user profile. For instructions, see section "Assigning PlanID card to
user" on page 93.
If you have a PlanID card and the dental unit is equipped with a PlanID
reader, sign in by showing the PlanID card to the PlanID reader on the
instrument console.
CAUTION
At least 15 cm of separation distance between the PlanID reader and the
user's body must be maintained at all times.
To be able to sign in with your PlanID card, the PlanID connection must be
enabled. The connection status is shown in the
Sign in
in window.
PlanID is enabled.
PlanID is disabled or PlanID region has not been set.
Instrument console with balanced instrument arms
16 Signing in and out
82 Planmeca Compact i User's manual
To Next Page
Loading...
Need help?
General
