5 Annual maintenance
To guarantee the dental unit’s proper operation, the unit must be checked
and serviced by a qualified Planmeca service technician according to the
maintenance schedule that has been set for your dental unit.
In the annual maintenance, the service technician replaces all parts
specified by the maintenance kit. These include, but are not limited to, parts
in contact with air, water and suction systems. In addition, the service
technician checks and services all dental unit parts suspect to wear and tear
in normal use. These include parts in the cuspidor, foot control, instrument
console, delivery arms, patient chair, suction arm and operating light. Also,
the mechanical stability and electrical safety inspection is performed.
The default maintenance interval is 365 days.
In the
About this unit
window you can check when the annual maintenance
was last performed and when it should be performed next.
A help message will remind you about the annual maintenance well in
advance.
5 Annual maintenance
6 Planmeca Compact i User's manual
To Next Page
Loading...
Need help?
General
