Planmeca Compact i Touch v2 User Manual

11. When the disinfectant has been fed, help message H 31 is displayed
(you will hear a signal tone).
This means that you should now turn off the unit’s power.
Let the disinfectant stay in the unit overnight (min 8h). After the waiting
period you may proceed to section "Waterline flushing" on page 223.
NOTE
The disinfectant must not be left in the unit for longer than one night (not,
for example, over the weekend).
NOTE
If you do not start waterline cleaning as described in this section, but
instead start it simply by attaching the disinfectant container to the dental
unit, help message H 55 is displayed.
To proceed with the cleaning cycle, you must select the instruments and
insert them into the flushing holder as described in steps 1 - 4 in this
section and then press the Waterline cleaning button as instructed on the
control panel.
To cancel the cleaning cycle, press Close. A help message instructs you
how to proceed:
- If the cleaning cycle is cancelled after the container has been attached
to the unit, help message H 35.1 is displayed.
- If help message H 35 is displayed, you must open the water tap, select
the instruments, put them in the flushing holder and press the Instrument
flushing button to flush the instruments.
After flushing, ensure that the water coming from the instruments is clear
before you resume working on the dental unit.
27.6.3 Waterline flushing
About this task
When the disinfectant has stayed in the unit overnight, follow the steps
below to perform waterline flushing.
27 Flushing and cleaning programs
User's manual Planmeca Compact i 223

Planmeca Compact i Touch v2 Specifications

General

Brand	Planmeca
Model	Compact i Touch v2
Category	Medical Equipment
Language	English