Power supply related error messages
ERROR
CODE
EXPLANATION
E16.3 Scaler electronics slot does not match with scaler hose
connection.
Check scaler electronics connection.
E16.4 Other instrument than scaler is connected to slot where scaler
electronics is.
Check scaler electronics connection.
E17 Power Supply related error messages.
E18 Power Supply related error messages.
31.3.3 Control panel related error messages
Control panel related error messages
ERROR
CODE
EXPLANATION
E19.1 Control panel in branch 1 is of new type.
Update MCB software.
E19.2 Control panel in branch 2 is of new type.
Update MCB software.
E20.1 Control panel 1 button stuck.
Control panel button is stuck during self test.
E20.2 Control panel 2 button stuck.
Control panel button is stuck during self test.
E21 Control panel related error messages.
E22 Control panel related error messages.
31.3.4 Instrument related error messages
Instrument related error messages
ERROR
CODE
EXPLANATION
E23 Polymerisation light bulb has blown or is not properly attached
to socket.
E23.1 Instrument overtemperature error.
Check the instrument handpiece and let the instrument cool
down.
E23.2 Micromotor error; phase missing.
Check that the micromotor and hose are connected properly.
E23.3 Instrument undervoltage error.
E23.4 Instrument power protection error.
E23.5 Instrument EEPROM error.
31 Help and error messages
268 Planmeca Compact i User's manual
To Next Page
Loading...
