Planmeca Compact i Touch v2 User Manual

25.6.3 Duration of cup filling
About this task
NOTE
By default, the cup fill is not activated unless the cup is positioned in its
place under the cup fill tube. To change this setting, contact your Planmeca
dealer.
NOTE
The water in the dental unit is intended for rinsing only, not for drinking.
Steps
1. Press Program.
2. Press Cup fill.
A pop-up window opens.
3. Adjust the duration of the cup filling.
The minimum value is 2 seconds and the maximum is 10 seconds. The
duration is adjusted in steps of 0.5 seconds.
4. Press OK.
The pop-up window closes.
What to do next
The duration of the cup filling can also be programmed as follows:
1. Place an empty cup to the cup holder.
2. Press Program.
3. Press Cup fill.
25 Programming
User's manual Planmeca Compact i 189

Planmeca Compact i Touch v2 Specifications

General

Brand	Planmeca
Model	Compact i Touch v2
Category	Medical Equipment
Language	English