Planmeca Compact i3 User Manual

NOTE
The dental unit can be configured so that the operating light's intensity in the
composite mode can be adjusted when you press and hold the Flexy button.
Contact your Planmeca dealer.
NOTE
The foot control can be configured so that the intensity is adjusted when you
push and hold the left-side or the right-side knob up. Contact your Planmeca
dealer.
21.4.6 Changing light tone of operating light
The white light tone of the operating light can be warm, neutral or cool.
From operating light
From both handles
When the light is on (and composite mode off), press and hold both handle
buttons simultaneously to toggle between the three colour temperatures
warm, neutral and cool.
You will hear a signal tone when you toggle the colour temperature from the
handle buttons.
From dental unit
You can change the light tone by pushing the left-side or the right-side knob
up, if this function has been configured to the foot control. To configure the
function, contact your Planmeca dealer.
Alternatively, you can change the light tone by pressing the Flexy button, if
this function has been configured to the Flexy button. To configure the
function, contact your Planmeca dealer.
You can also change the light tone in the programming window, see section
"Colour temperature and brightness" on page 164.
21 Operating dental unit
User's manual Planmeca Compact i3 97

Planmeca Compact i3 Specifications

General

Brand	Planmeca
Model	Compact i3
Category	Dental equipment
Language	English