6 Symbols on product labels
Date of manufacture (Standard ISO 7000).
SGS listing marking according to US and Canadian standards (ANSI/AAMI
ES60601-1 and CAN/CSA C22.2 No. 60601- 1).
Type B applied part (Standard IEC 60417).
Type BF applied part for specified dental instruments (Standard IEC 60417).
Alternating current (Standard IEC 60417)
On/Off switch (Standard IEC 60417).
Refer to instruction manual/booklet (Standard ISO 7010).
General warning (Standard ISO 7010).
Warning, crushing hazard: hand (Standard ISO 7010).
Warning, hot surface (Standard ISO 7010).
Warning: Electricity (Standard ISO 7010).
To avoid risk of electric shock, this equipment must only be connected to a
supply mains with protective earth.
Health hazard (acc. to EC regulation no. 1272/2008).
6 Symbols on product labels
User's manual Planmeca Compact i3 7
To Next Page
Loading...
