24.6.3 Gesture sensor
Steps
1. Press Program.
2. Press Operating light or Composite mode. Both buttons open the same
pop-up window.
3. Open the
Sensor
tab.
4. Toggle the gesture sensor button to enable/disable the gesture sensor.
A grey button means that the function is disabled, and a blue button that
the function is enabled.
5. Adjust the distance at which the gesture sensor on the operating light
reads your hand movements by dragging the handles to a suitable
position.
6. Press OK.
24 Programming
166 Planmeca Compact i3 User's manual
To Next Page
Loading...
Need help?
General
