Planmeca Compact i3 - 27.5 Instrument flushing holder; 27.6 Coarse filter

You can check how full the oil collector is without removing it. If the oil level
in the narrower chamber has started to fill, it is time to empty the oil collector.
To remove the oil collector from the instrument console, unscrew the oil
collector attachment knob and carefully pull the collector out.
27.5 Instrument flushing holder
Clean the instrument flushing holder once a month using a soft brush and a
mild soap and water solution.
27.6 Coarse filter
Empty the coarse filter daily or when it is full. Replace it monthly.
NOTE
The coarse filter should be emptied into a separate amalgam container.
27 Cleaning and disinfection
User's manual Planmeca Compact i3 187