9 Planmeca Solanna and Planmeca Solanna Vision
operating lights
CAUTION
Do not allow the patient to grab the operating light or its arm when getting
seated or getting up from the patient chair.
You can operate the Planmeca Solanna operating light either from the light
itself, or from the dental unit’s control panel or foot control. It also features a
“no touch” function, which means that you can operate the light by waving
your hand in front of the sensor.
The Planmeca Solanna Vision operating light has all the features of the
Planmeca Solanna operating light and is also equipped with two cameras
and a microphone that can be used for video streaming, capturing still
images and recording videos.
You can operate the Planmeca Solanna Vision operating light either from the
light itself, from the dental unit’s control panel or foot control, or from
Planmeca Romexis software. All data is stored in Planmeca Romexis.
For information on how to operate the operating light, see section "Planmeca
Solanna and Planmeca Solanna Vision operating light" on page 89.
For information on how to operate the camera, see section "Planmeca
Solanna Vision camera" on page 98.
For instructions on how to program the operating light, see section
"Planmeca Solanna and Planmeca Solanna Vision operating lights" on page
163.
9 Planmeca Solanna and Planmeca Solanna Vision operating lights
24 Planmeca Compact i3 User's manual