Planmeca Compact i3 User Manual

3. Press Instrument speed/power limit.
When you are programming the turbine, press Turbine speed/power
limit.
A pop-up window opens.
4. For W&H and Minetto brushless micromotors only: Press %/rpm to
select whether you want to adjust the instrument speed/power limit in
percentage points or in rpm. The appearance of the button in the
instrument view changes accordingly.
5. Adjust the instrument speed/power limit.
The minimum speed/power limit is 5 or 10% (depending on the
instrument) and the maximum is 95%. The adjustment step is 5.
If the preset value is, for example, 50%, the foot control pedal movement
controls the speed/power between 5 - 50% instead of the normal range
of 5 - 100%.
6. Press OK.
The pop-up window closes.
24.4.2 Instrument spray
Steps
1. Activate the instrument.
2. Press Program.
3. Press Instrument spray.
A pop-up window opens.
4. Adjust the flow rates for water and air.
Scaler: Adjust the flow rates for water 1 and water 2.
The minimum value of all parameters is 0 (no flow) and maximum 100.
The adjustment step is 1 in the value range 0 - 35% and 5 in the value
range 35 - 100%.
5. Press OK.
The pop-up window closes and the new values are displayed on the
control panel.
24 Programming
152 Planmeca Compact i3 User's manual

Planmeca Compact i3 Specifications

General

Brand	Planmeca
Model	Compact i3
Category	Dental equipment
Language	English