Planmeca Compact i3 User Manual

NOTE
The foot control can be configured so that you push the left-side knob down
to change the scaler mode. Contact your Planmeca dealer.
NOTE
Check the scaler mode symbol on the control panel to verify that pushing the
left-side knob down activates the correct function.
22.8.7 Instrument light
When the instrument light is on, the indicator light on the control panel button
is green.
Control panel: Press Instrument light to switch the instrument light on/off.
NOTE
The foot control can be configured so that you push the left-side knob down
to switch the instrument light on/off. Contact your Planmeca dealer.
NOTE
Check the indicator light on the control panel to verify that pushing the left-
side knob down activates the correct function.
The instrument light intensity can be programmed, see section "Instrument
light" on page 154.
22.9 Planmeca Lumion Plus polymerisation light
CAUTION
The polymerisation light generates optical radiation and proper safety
measures should be taken when using the instrument. For detailed
information, please refer to OEM documentation.
CAUTION
Do not use the polymerisation light on patients with cardiac pacemakers.
The polymerisation light can cause disturbance on the pacemaker’s function.
NOTE
When the polymerisation light is taken from the holder in the instrument
console and returned to it, the operating light's composite mode is switched
on. This feature is configurable; contact your Planmeca dealer.
To start the polymerisation cycle, first select the desired curing mode by
pressing the navigation button on the handpiece. Then, start the
polymerisation cycle by pressing the start button on the handpiece.
The polymerisation cycle can be interrupted by pressing the start button
again.
22 Operating instruments
User's manual Planmeca Compact i3 137

Planmeca Compact i3 Specifications

General

Brand	Planmeca
Model	Compact i3
Category	Dental equipment
Language	English