Planmeca Compact i3 User Manual

Traditional view
Control panel: To move the chair to a preprogrammed position, press briefly
the corresponding chair position button.
Foot control: Push the centre knob briefly to the position (A, B, C or D)
where the preprogrammed chair position has been stored. The chair will
move automatically to the preprogrammed position.
20.3.4 Selecting entry/exit position
Extended view
When the chair moves to the entry/exit position, the bowl on the Chair
positions button flashes throughout the movement.
When the chair stops in the entry/exit position, the bowl symbol on the Chair
positions button stops flashing.
When the chair stops in the entry/exit position, the indicator light on the
Chair positions button turns green.
To return to the previous working position, press Chair positions again and
select
Working position from the list that opens. An arrow on the button
flashes throughout the movement. When the chair stops, the operating light
turns back on, if it was on initially.
Standard view
Press Entry/exit position to move the chair to the preprogrammed entry/exit
position. The indicator light flashes throughout the movement.
When the chair stops in the entry/exit position, the indicator light remains on
and an arrow appears below the indicator light.
When the chair stops in the entry/exit position, the indicator light remains on.
When you press Entry/exit position again, the chair will return to the previous
working position. The indicator light flashes throughout the movement.
20 Operating patient chair
User's manual Planmeca Compact i3 85

Planmeca Compact i3 Specifications

General

Brand	Planmeca
Model	Compact i3
Category	Dental equipment
Language	English