Planmeca Compact i3 User Manual

• Latvian
• Lithuanian
• Estonian
3. Select a language by pressing it.
Move up and down on the list by pressing the up/down buttons.
The list of languages closes and the language of your choice is
displayed on the control panel.
21.2 Timer
About this task
The timer memory contains six preprogrammed time settings. Follow the
steps below to activate a timer.
NOTE
Other functionalities can be used while the timer is running.
NOTE
The timer can not be run from the foot control.
Steps
1. Press Timer to open a list of available timers.
2. Select a timer from the list.
The Timer button’s indicator light is lit and the duration of the timer is
displayed on the control panel.The countdown begins immediately, but
the selected time is displayed for five seconds before the actual
countdown is displayed.
If you wish to close the list without selecting a timer, press Close.
Results
When the timer reaches zero you will hear two signal tones and the indicator
light goes off.
The function can be cancelled by pressing Timer again.
The preset timers can be reprogrammed, see section "Timer settings" on
page 162.
21.3 Door open / assistant call
If you have installed a door opening device or assistant call, you may
activate these from the control panel or the foot control.
NOTE
Only one of these functions can be enabled at a time. To change the
enabled function, contact your Planmeca dealer.
21 Operating dental unit
88 Planmeca Compact i3 User's manual

Planmeca Compact i3 Specifications

General

Brand	Planmeca
Model	Compact i3
Category	Dental equipment
Language	English