Planmeca Compact i3 - Page 37

1. Instrument hose
2. Quick-connector
Switch the unit off before opening the quick-connectors. When disconnecting
the syringe, empty the water and air from the hose before opening the
connector.
The instrument location on the instrument console can be changed simply by
removing the instrument with its hose and reconnecting it to the new place.
The old instrument settings will remain the same despite of the new location
of the instrument hose.
The instrument selection on the instrument console can also be
interchanged. The settings of the eight last used instruments are stored in
the memory, and are recalled when the instrument is reconnected.
10 Instrument system
User's manual Planmeca Compact i3 29