3.46
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
11. The cam gear assembly contains three loaded
springs. To open the cam gear assembly:
• Place the cam gear on a flat surface with the
timing mark side facing up.
• While holding both gears together, lightly work a
small flathead screwdriver between the two gears.
• Remove the top gear. The springs should stay in
place.
CAUTION
Wear safety glasses at all times. Use caution when
working with the top gear.
The springs could cause injury or become lost should
they pop out.
12. Remove all three springs using one of the tapered
pins from (PU-45497-1).
13. With a white marking pen, accent the timing mark on
the gear that contains the springs.
14. Inspect the gear teeth and the three tabs on the
gears for wear.
ENGINE
To Next Page
Loading...
