4
4.19
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
6. Using special tool (PA-48873), torque the upper (2)
bolts retaining the mounting bracket to the rear
gearcase. Place the torque wrench through the rear
exhaust silencer opening to gain access to the bolts.
Middle Rear Gearcase Bolt
Upper Rear Gearcase Bolt
7. Torque the remaining bolt that attaches the bracket
to the front side of the rear gearcase.
Front Rear Gearcase Bolt
NOTE: A multi-directional torque wrench is
required in this application because of the
limited access to this bolt. Check with the
manufacturer of your torque wrench to see if it
can be used to tighten left-hand threaded bolts.
ELECTRONIC FUEL INJECTION
To Next Page
Loading...
